CO2 Injection Well Design and Management Training Course

CO₂ Injection Well Design and Management Training Course

Introduction

CO₂ Injection Well Design and Management Training Course is designed to equip participants with advanced technical knowledge and practical skills in carbon dioxide injection well engineering, carbon capture and storage (CCS), geological sequestration, and sustainable subsurface operations. Participants will gain insights into CO₂ phase behavior, fluid-rock interactions, corrosion-resistant materials, cementing technologies, casing design, completion systems, and wellhead equipment selection. Through an integrated approach combining petroleum engineering principles, reservoir simulation, and carbon storage engineering, the training emphasizes safe, reliable, and economically viable injection well development in accordance with recognized industry standards and environmental requirements.

The program incorporates practical case studies, engineering calculations, scenario-based exercises, and lessons learned from carbon storage and enhanced oil recovery projects. Key areas include digital well monitoring, real-time pressure and temperature analysis, predictive maintenance, data-driven risk assessment, and regulatory compliance for carbon storage facilities. By integrating conventional well engineering expertise with emerging carbon capture, utilization, and storage (CCUS) technologies, this course prepares professionals to contribute to technically sound injection well projects that support industrial decarbonization, climate objectives, operational efficiency, and long-term environmental protection.

Course Duration

5 Days

Course Objectives

By the end of this course, participants will be able to:

1. Explain the principles of CO₂ injection well engineering and their role in carbon capture and storage projects.
2. Evaluate geological formations for carbon sequestration potential, storage capacity, and injectivity.
3. Apply well design principles to casing selection, tubing configuration, and injection completion systems.
4. Analyze CO₂ phase behavior, thermodynamic properties, and pressure-temperature relationships during injection.
5. Assess wellbore integrity risks associated with CO₂ corrosion, cement degradation, and material compatibility.
6. Perform injection pressure calculations and establish safe operating envelopes for CO₂ injection wells.
7. Evaluate reservoir geomechanics, fracture pressure, fault reactivation risks, and caprock integrity.
8. Develop effective well integrity management and risk-based inspection strategies.
9. Apply reservoir simulation concepts to predict injectivity, pressure buildup, and plume migration.
10. Implement monitoring, measurement, and verification (MMV) techniques for carbon storage operations.
11. Identify potential leakage pathways and develop preventive and corrective mitigation measures.
12. Integrate digital monitoring, data analytics, and predictive maintenance into injection well operations.
13. Apply relevant industry standards, environmental safeguards, and regulatory requirements to CO₂ injection well projects.

Target Audience

1. Petroleum and production engineers involved in injection well development.
2. Drilling and completion engineers responsible for well construction and design.
3. Reservoir engineers working on carbon storage and CO₂ injection projects.
4. Well integrity engineers and asset integrity management specialists.
5. Geoscientists, geologists, and geomechanics specialists evaluating storage formations.
6. Carbon capture, utilization, and storage (CCUS) project engineers and managers.
7. HSE professionals, environmental engineers, and regulatory compliance specialists.
8. Technical consultants, operations supervisors, and energy professionals transitioning into carbon management.

Course Modules

Module 1: Fundamentals of CO₂ Injection and Carbon Storage

• Principles of carbon capture, utilization, and storage (CCUS).
• CO₂ properties, phase behavior, density, viscosity, and compressibility.
• Geological storage mechanisms: structural, residual, solubility, and mineral trapping.
• Overview of saline aquifers, depleted reservoirs, and other potential storage formations.
• Introduction to injection well lifecycle planning and carbon storage project economics.
• Case Study: Evaluate the technical suitability of a depleted hydrocarbon reservoir for CO₂ injection, considering geological containment, existing well infrastructure, and storage objectives.

Module 2: Geological Characterization and Reservoir Selection

• Reservoir porosity, permeability, heterogeneity, and storage capacity assessment.
• Caprock integrity, seal effectiveness, and geological containment evaluation.
• Fault mapping, fracture characterization, and subsurface uncertainty analysis.
• Formation pressure, temperature, and fluid compatibility assessment.
• Integration of well logs, seismic interpretation, core analysis, and reservoir data.
• Case Study: Assess two potential geological storage formations and recommend the preferred site using injectivity, containment, and geological risk criteria.

Module 3: CO₂ Injection Well Design and Engineering

• Injection well architecture, trajectory planning, and design considerations.
• Casing and tubing selection based on pressure, temperature, and chemical exposure.
• Wellhead, valves, packers, and completion equipment specifications.
• CO₂-compatible materials and corrosion-resistant alloy selection.
• Well design calculations, load cases, safety factors, and operating envelopes.
• Case Study: Develop a conceptual injection well design for a saline aquifer, comparing alternative tubing and casing materials under anticipated operating conditions.

Module 4: Drilling, Cementing, and Well Construction

• Drilling fluid selection and wellbore stability considerations.
• Casing installation, cement placement, and zonal isolation requirements.
• Cement compatibility with CO₂-rich fluids and long-term exposure.
• Well control considerations during drilling and completion operations.
• Construction quality assurance, pressure testing, and handover documentation.
• Case Study: Investigate a hypothetical loss of zonal isolation in a CO₂ injection well and recommend cementing, testing, and remediation measures.

Module 5: Injection Operations and Pressure Management

• CO₂ injection rate optimization and operating pressure control.
• Pressure-temperature monitoring and phase behavior during injection.
• Injectivity assessment and formation pressure response analysis.
• Management of pressure buildup, thermal effects, and flow restrictions.
• Injection scheduling, operational efficiency, and abnormal condition response.
• Case Study: Analyze declining injectivity in a storage well and develop a diagnostic plan covering reservoir pressure, completion restrictions, and possible formation damage.

Module 6: Well Integrity, Corrosion, and Materials Management

• CO₂ corrosion mechanisms and the effects of water content and impurities.
• Tubing, casing, packer, and wellhead integrity assessment.
• Cement degradation, microannulus formation, and leakage pathway evaluation.
• Risk-based inspection, integrity testing, and preventive maintenance.
• Well integrity barriers, failure analysis, and remediation planning.
• Case Study: Develop a well integrity management plan for an injection well showing abnormal annular pressure and suspected barrier degradation.

Module 7: Monitoring, Reservoir Simulation, and Leakage Prevention

• Monitoring, measurement, and verification (MMV) frameworks.
• Pressure transient analysis and injection performance surveillance.
• Reservoir simulation for CO₂ plume migration and pressure propagation.
• Well logging, seismic monitoring, and suitable leakage detection techniques.
• Data integration, anomaly detection, and risk-based monitoring plans.
• Case Study: Interpret hypothetical pressure and monitoring data indicating unexpected plume movement and propose an investigation and mitigation strategy.

Module 8: Risk Management, Regulatory Compliance, and Lifecycle Optimization

• CO₂ injection hazard identification and quantitative risk assessment.
• Fault reactivation, induced seismicity, and caprock failure considerations.
• Environmental risk management and groundwater protection.
• Regulatory permitting, documentation, reporting, and storage assurance.
• Well suspension, abandonment, post-injection monitoring, and long-term stewardship.
• Case Study: Prepare a lifecycle risk management plan for a proposed CO₂ storage project, including operational safeguards, emergency response, closure criteria, and post-injection monitoring.

Training Methodology

• Interactive lectures and presentations.
• Group discussions and brainstorming sessions.
• Hands-on exercises using real-world datasets.
• Role-playing and scenario-based simulations.
• Analysis of case studies to bridge theory and practice.
• Peer-to-peer learning and networking.
• Expert-led Q&A sessions.
• Continuous feedback and personalized guidance.

Register as a group from 3 participants for a Discount

Send us an email: info@datastatresearch.org or call +254724527104 

Certification

Upon successful completion of this training, participants will be issued with a globally- recognized certificate.

Tailor-Made Course

 We also offer tailor-made courses based on your needs.

Key Notes

a. The participant must be conversant with English.

b. Upon completion of training the participant will be issued with an Authorized Training Certificate

c. Course duration is flexible and the contents can be modified to fit any number of days.

d. The course fee includes facilitation training materials, 2 coffee breaks, buffet lunch and A Certificate upon successful completion of Training.

e. One-year post-training support Consultation and Coaching provided after the course.

f. Payment should be done at least a week before commence of the training, to DATASTAT CONSULTANCY LTD account, as indicated in the invoice so as to enable us prepare better for you.