Advanced Subsea Engineering Training Course

Advanced Subsea Engineering Training Course

Introduction

Advanced Subsea Engineering Training Course designed to equip oil and gas professionals with advanced technical knowledge and practical competencies in subsea production systems, offshore field development, deepwater engineering, and subsea infrastructure management. This course explores the complete subsea engineering lifecycle, including subsea wellheads, Christmas trees, manifolds, flowlines, risers, umbilicals, subsea control systems, and subsea processing technologies. Participants will develop a comprehensive understanding of subsea system design, deepwater engineering, subsea equipment selection, flow assurance, hydraulic and electrical control systems, offshore pipeline integrity, and subsea production optimization. The program also examines emerging industry trends such as digital twins, artificial intelligence (AI) in offshore operations, remote subsea monitoring, autonomous underwater vehicles (AUVs), and advanced subsea inspection technologies.

The course emphasizes reliability engineering, risk-based inspection, subsea integrity management, asset lifecycle optimization, offshore safety, and sustainable energy operations. Participants will explore the engineering considerations associated with high-pressure and high-temperature (HPHT) subsea systems, multiphase flow transportation, hydrate prevention, corrosion control, pressure management, and subsea intervention planning. Additional attention is given to project execution, engineering procurement and construction (EPC), commissioning, maintenance strategies, and decommissioning requirements. By integrating proven engineering practices with innovative digital technologies and contemporary offshore project management methods, the Advanced Subsea Engineering Training Course prepares participants to improve equipment reliability, reduce unplanned shutdowns, optimize capital expenditure, and enhance production performance in demanding offshore environments.

Course Duration

10 days

Course Objectives

By the end of this training course, participants will be able to:

1. Apply advanced subsea engineering principles to the design, development, and optimization of offshore oil and gas production systems.
2. Evaluate subsea field development concepts using technical feasibility studies, lifecycle cost analysis, and production forecasting.
3. Design and assess subsea production systems, including wellheads, Christmas trees, manifolds, jumpers, and flowlines.
4. Analyze subsea pipeline and riser systems using modern engineering standards, structural analysis, and fatigue assessment techniques.
5. Apply advanced flow assurance strategies to prevent hydrate formation, wax deposition, scale buildup, and multiphase flow instability.
6. Evaluate subsea control systems, electrohydraulic technologies, instrumentation, and remote monitoring solutions.
7. Implement subsea integrity management practices for corrosion prevention, erosion monitoring, fatigue management, and equipment reliability.
8. Conduct subsea risk assessments using failure mode and effects analysis (FMEA), hazard identification (HAZID), and reliability-centered maintenance (RCM).
9. Integrate digital twins, predictive analytics, and AI-enabled monitoring into subsea asset management.
10. Assess subsea processing, boosting, separation, and compression technologies for improved reservoir recovery.
11. Develop effective subsea inspection, maintenance, and repair strategies using remotely operated vehicles (ROVs) and AUVs.
12. Manage subsea project execution, installation engineering, commissioning, and operational readiness.
13. Apply cost optimization, environmental risk management, and lifecycle sustainability principles to subsea engineering projects.

Target Audience

1. Subsea engineers and subsea systems engineers.
2. Offshore and petroleum engineers.
3. Subsea project managers and engineering project coordinators.
4. Pipeline, riser, and flow assurance engineers.
5. Offshore production and operations engineers.
6. Asset integrity, inspection, maintenance, and reliability engineers.
7. Drilling, completion, and well intervention specialists.
8. Technical consultants, engineering contractors, and oil and gas asset managers.

Course Modules

Module 1: Fundamentals of Advanced Subsea Engineering

• Principles and evolution of subsea engineering.
• Overview of subsea production architectures and system configurations.
• Deepwater and ultra-deepwater engineering challenges.
• Subsea project lifecycle, design basis, and engineering deliverables.
• Case study: Comparing subsea tieback and standalone development concepts for a deepwater oilfield.

Module 2: Subsea Field Development Planning and Concept Selection

• Subsea field architecture and development strategy.
• Reservoir characteristics and subsea infrastructure requirements.
• Tieback distance, water depth, and host facility selection.
• Technical and economic evaluation of development alternatives.
• Case study: Selecting an economically viable subsea development concept for a marginal offshore field.

Module 3: Subsea Wellheads and Production Tree Systems

• Subsea wellhead architecture and load-bearing components.
• Subsea Christmas tree configurations and functional requirements.
• Tree valves, connectors, barriers, and pressure-containing components.
• Horizontal and vertical subsea tree selection criteria.
• Case study: Investigating a subsea tree valve failure and developing a corrective engineering strategy.

Module 4: Subsea Manifolds, Jumpers, and Flowline Connections

• Subsea manifold design and production routing.
• Gathering systems, headers, isolation valves, and connectors.
• Jumper design, interface management, and installation tolerances.
• Hydraulic, mechanical, and structural connection requirements.
• Case study: Optimizing a subsea manifold layout to improve well access and reduce installation complexity.

Module 5: Subsea Pipeline and Riser Engineering

• Subsea pipeline design principles and design codes.
• Riser configurations, including flexible, rigid, and hybrid systems.
• Pressure containment, buckling, fatigue, and structural integrity.
• Pipeline stability, thermal expansion, and free-span assessment.
• Case study: Assessing fatigue damage and free-span risks on a deepwater production pipeline.

Module 6: Flow Assurance and Multiphase Flow Management

• Multiphase flow behavior in subsea production systems.
• Hydrate formation, wax deposition, and asphaltene management.
• Slugging, pressure drop, and thermal-hydraulic analysis.
• Chemical injection, insulation, and active flow assurance controls.
• Case study: Developing a hydrate prevention and restart strategy for a long-distance subsea tieback.

Module 7: Subsea Control Systems and Instrumentation

• Subsea control architectures and control module design.
• Electrohydraulic and all-electric subsea control systems.
• Sensors, pressure transmitters, and production monitoring instruments.
• Umbilical design, power distribution, and communication systems.
• Case study: Troubleshooting intermittent communication and control failures in a subsea production network.

Module 8: Subsea Processing and Artificial Lift Technologies

• Subsea separation and water management technologies.
• Multiphase boosting and subsea pumping systems.
• Subsea compression and gas handling applications.
• Artificial lift integration and reservoir pressure support.
• Case study: Evaluating subsea boosting to improve production from a declining deepwater reservoir.

Module 9: High-Pressure and High-Temperature Subsea Engineering

• HPHT operating conditions and subsea design envelopes.
• Material selection and pressure-containing equipment qualification.
• Thermal expansion, seal performance, and fatigue considerations.
• Qualification testing and engineering design verification.
• Case study: Assessing equipment qualification requirements for a high-pressure subsea gas development.

Module 10: Subsea Integrity, Corrosion, and Reliability Engineering

• Corrosion mechanisms and material degradation in subsea environments.
• Cathodic protection and corrosion monitoring strategies.
• Erosion, fatigue, and mechanical damage assessment.
• FMEA, reliability-centered maintenance, and risk-based inspection.
• Case study: Developing an integrity management plan for aging subsea flowlines and connectors.

Module 11: Subsea Installation, Construction, and Commissioning

• Subsea installation engineering and installation method selection.
• Vessel capabilities, lifting systems, and offshore logistics.
• ROV-assisted installation, metrology, and seabed intervention.
• Pre-commissioning, pressure testing, flushing, and system verification.
• Case study: Resolving an installation alignment issue during a subsea manifold deployment.

Module 12: Subsea Inspection, Maintenance, and Intervention

• Inspection planning and subsea condition assessment.
• ROV and AUV applications for inspection and intervention.
• Subsea valve, connector, and control module maintenance.
• Repair strategies, intervention tooling, and operational planning.
• Case study: Planning a subsea connector repair campaign while minimizing production downtime.

Module 13: Digital Subsea Engineering and Intelligent Asset Management

• Digital twins for subsea equipment and production networks.
• AI-driven predictive maintenance and anomaly detection.
• Real-time subsea monitoring and remote operations centers.
• Data integration, asset performance dashboards, and digital workflows.
• Case study: Using sensor trends and predictive analytics to identify an emerging subsea equipment failure.

Module 14: Subsea Risk Management, Safety, and Environmental Protection

• HAZID, HAZOP, FMEA, and quantitative risk assessment.
• Subsea barrier management and well integrity considerations.
• Hydrocarbon leak detection and emergency response planning.
• Environmental impact assessment and offshore regulatory compliance.
• Case study: Conducting a risk assessment for a suspected subsea pipeline leak and evaluating response options.

Module 15: Subsea Project Economics, Lifecycle Optimization, and Future Technologies

• Subsea capital expenditure and operating expenditure optimization.
• Lifecycle costing, reliability forecasting, and production economics.
• Subsea decommissioning, removal, and abandonment planning.
• Emerging technologies, including all-electric systems and autonomous inspection.
• Case study: Comparing lifecycle costs and reliability outcomes for conventional and digitally enabled subsea developments.

Training Methodology

• Interactive lectures and presentations.
• Group discussions and brainstorming sessions.
• Hands-on exercises using real-world datasets.
• Role-playing and scenario-based simulations.
• Analysis of case studies to bridge theory and practice.
• Peer-to-peer learning and networking.
• Expert-led Q&A sessions.
• Continuous feedback and personalized guidance.

Register as a group from 3 participants for a Discount

Send us an email: info@datastatresearch.org or call +254724527104 

Certification

Upon successful completion of this training, participants will be issued with a globally- recognized certificate.

Tailor-Made Course

 We also offer tailor-made courses based on your needs.

Key Notes

a. The participant must be conversant with English.

b. Upon completion of training the participant will be issued with an Authorized Training Certificate

c. Course duration is flexible and the contents can be modified to fit any number of days.

d. The course fee includes facilitation training materials, 2 coffee breaks, buffet lunch and A Certificate upon successful completion of Training.

e. One-year post-training support Consultation and Coaching provided after the course.

f. Payment should be done at least a week before commence of the training, to DATASTAT CONSULTANCY LTD account, as indicated in the invoice so as to enable us prepare better for you.